There are two flush buttons on the toilet tank, half the size is larger and the other half is smaller. Do you know what they do? When using the toilet daily, how do I press the two flush buttons correctly? Today I finally have the answer…..
The role of the two buttons
The large and small buttons of the water tank represent the functions of full water and half water drainage respectively.
Small button: It is half-water state. Pressing it will only discharge one-half or one-third of the water, but not all the water in the water tank.
Big button: It is the full water button, press it to drain all the water at one time.
When urinating daily, just press the small button, otherwise, press the big button. If you press two buttons at the same time, all the water in the water tank will be released, so the flushing horsepower will be greater and the water volume will be more.
These two buttons are designed to save water. Choose different flushing amounts according to different situations, which can flush the toilet and save water.
The toilet will have yellow stains after being used for a long time. Put a mineral water bottle in the water tank to decontaminate and deodorize!
White vinegar + mineral water bottle
Step 1: Mix white vinegar and water in a ratio of 1:5 and pour in.
Step 2: Poke a few small holes at the bottom of the mineral water bottle.
Step 3: Put the bottle upright into the water tank, just poke the bottom of the small hole downward so that the vinegar water can flow into the water tank.
Function: White vinegar has the functions of removing dirt, sterilizing and deodorizing. The main components of urine stains and dirt on the toilet are calcium carbonate and magnesium hydroxide. White vinegar is an acidic substance. After a chemical reaction with the dirt on the toilet, it will become some soluble salt solution. Every time the toilet is flushed, the white vinegar will work once, so that any stains will disappear.
You can also use waste stockings and soap heads to remove odors from the toilet. They are also a good helper for toilet cleaning!
Remove peculiar smell from toilet
Method 1: Put the soap bar into the stockings, tie a knot, and put it in the toilet tank. When closing the toilet lid, press the edge of the stockings to make it secure.
Function: Every time you use the toilet to flush, it is equivalent to washing the toilet with soapy water, which is simple and deodorant, and can save the cost of toilet cleaner.
Method 2: Use a needle to pierce a few small holes in the balloon, and then pour the toilet water; then tie a knot to the balloon so that the toilet water will slowly penetrate into the water tank along the small holes.
Step 2: Put the balloon into the water tank, so that there will be a fragrance of toilet water every time you flush the toilet.
Everyone knows that the toilet can be cleaned with a toilet brush, but the hygiene problem of the toilet brush is ignored.
Flush the toilet, cover? Still not covered?
Don’t worry! In layman’s terms, the feces in the toilet are actually drained through the siphon effect. The siphon effect produced after the water comes down is to suck away all the excrement. The effect of the siphon is far greater than the disturbing effect of the water flowing out of the air.
Expert advice:
Open the lid to flush the toilet, and the toilet is more ventilated. Toilet utensils are best placed at 1m-1.25m.
The number of bacteria below 1 meter is the largest, and children try to minimize their stay in the bathroom.
Comments